User Feedback :: Boot problems

I've downloaded 0.61, and I get "Kernel panic: no init"...
I downloaded from ibinlio and from dsl.thegeekery - both have the same problem, and both have the wrong md5sum. I guess the problem is a corrupt iso.

Can anyone tell me an iso which works for sure?
I'm on dial up so a 50Mb download takes a while... and if I get another bad iso, I might have to crawl into a corner and cry

my experience with 0.6.1 is the same as knoppix 3.3, which basically doesn't get past the hard drives. 0.5.3.1 works fine, and knoppix 3.2 seems to as well. hard drives are on a promise ata tx2 ultra 100 controller card. seems a little odd, as it's not like my system is ancient:
athlon xp 1500+
promise tx2 ultra 100 ide controller card
seagate ata IV 40 gig 7200rpm hdd (on controller card)
ibm 60gxp deskstar 60gig hdd (on controller card)
512meg pc2100 ddr crucial (micron) ram
shuttle ak31v3.1 kt 266a chipset mother board.
100mb zip, 8x4x32x cdr/w/rom dr, and 16x 40x dvd/cd-rom dr (or 48x cd-rom??)- on mb ide1&2.
dlink ethernet card w/ a realtek 8139 chipset

btw, md5sums check out ok. i've tried different cd-r media. perhaps it's time for a new burner?

hello? can some one PLEASE help me!!

original here.